SOURCE: where is the idle screw for cb nighthawk 750
follow your accel cable to the carb. move the throttle till you see where the linkage moves. look around the linkage to see what it hits on at no throttle. that will be your idle screw
SOURCE: i have a honda shadow areo 1100 the bike starts
You will have to check the carbs it seems the gas isn't flowing in freely into the float chamber and filling it up.
SOURCE: the bike will start and run as long as i give it
hi buddy on carb there 2 screws the big screw you need this is the idle screw you need to turn it in 1/4 of turns with bike started 
SOURCE: my 2003 honda xr70r3 stalls out when trying to
you probley have a blocked main jet in the carb take it off and blow it out or take it to a bike shop and get the carb cleaned if you take it off your self they should only charge you about 0.5 hours labour
SOURCE: 1993 honda nighthawk 750 tach. not working
i have found in the past its the cable not the tacho
406 views
Usually answered in minutes!
×