SOURCE: oil
Hi KK
Use 600 ml is you are changing the oil, or 650ml if you have just rebuilt the engine and filling from dry. Use light weight gear oil.
regards
robotek
SOURCE: 2nd gear does not work on my Yamaha Virago xv250
Sounds like a slightly bent shift fork. The slider gear isn't quite engaging into 2nd. If the bend gets worse then you won't get into first and the pedal will get real stiff in those gears. The repair is best done in the shop.
Please rate this solution. Thanks!
SOURCE: transmission will not upshift between 3rd and 4th gear
It sounds like the shifter pawl might not be centered. This is located behind the clutch basket and is a pretty big job to get to, easy adjustment just a pain to get to. You will need a manuel to do it yourself.
SOURCE: Lack of Power/Gas at high gear/RPM
Not a coil problem, gas problem. When you grab a handful of throttle with a fairly cold engine does it bog down on you? (choke off) if yes your running lean and likely need to go in and have your carbs cleaned out anf rebalanced.
SOURCE: 2007 yamaha ttr 125 wont go into gear. starts
gear selector may be jammed inside the casing or broken
check that the shifter is tight on the shaft!
check clutch adjustment
try rocking bike back n forth without using clutch while you try ******* the gear lever it may come unstuck
but get it looked at if it frees up!
514 views
Usually answered in minutes!
×