20 Most Recent
1996 Honda VT 1100 C2 Shadow Sabre Questions & Answers
Honda diagrams
Have you tried checking the start button? I had mine overheat, and the button lost contact and mine wouldn't start. (Which can kill the light and ability to start)
Low rpm loss of power with aftermarket vance and
If you have carburetors you need to install a jet kit. If you have a fuel injected bike you need to add a Power Commander and program it for the changes you have made to the intake side of the engine. Make sure you installed all new exhaust gaskets or you will have lots of popping and back firing.
Head lights dont work all
The problem is either: The head lamp fuse. Check this first. If the fuse is okay, make sure you've got battery voltage to the fuse. If not, clean the starter button contacts. Besides crancking the starter, the starter button also cuts power to the headlight when you press it. Sometimes if you press the starter button and let it release firmly (by sliding your thumb off of it, letting it snap outward), will fix this type of problem.
I replaced the starter silenoid in my 96 Honda Shadow VT1100c2
Hi and welcome to FixYa,
If everything has been checked as good, correct then a possibility is that the starter cable terminal and the battery cable terminals were installed the other way around to the starter relay. Switch terminals.
Good luck and thank you for asking FixYa.
How to replace a cluch on a 1996 honda shadow 1100
let the oil the engine, make many pictures as it is mounted.
then take the carter and make again pictures how the clutch is fitted and from the cable / lever adjustment.
make sure that your pictures that are , that you can reasemble easy your self.
And easy whit that thing , its aluminium.
good luck from the netherlands
Not finding what you are looking for?