20 Most Recent
2004 Daelim Altino 125 Questions & Answers
Chain
Yes All motorcycle chains currently being manufactured use Buna-N (Nitrile) rubber for their o-rings and x-rings and all these manufacturers recommend kerosene as a cleaner.
Here's the formulation of WD-40:
80% Stoddard Solvent (that is similar to kerosene)
20% light lubricating oil and a bit of fragrance.
Here's the compatibility of Stoddard Solvent with rubbers and plastics:
Good Compatibility (OK for both static and dynamic seals)
Buna-N (Nitrile)
Chemraz
Epichlorohydrin
Fluorocarbon
Fluorosilicone
Kalrez
Nitrile, hydrogenated
Polyacrylate
Teflon, virgin
Mixed Compatibility (OK for static seals, but not for dynamic seals)
Neoprene
Vamac
Fair Compatibility (OK for some static seals)
Polysulfide
Polyurethane, millable
Poor Compatibility
Butyl
Ethylene-Propylene
Hypalon
Natural rubber
Silicone
Styrene Butadiene
Consequently, WD-40 is safe and effective as a chain cleaner and corrosion inhibitor.
Link:
http://www.efunda.com/designstandard...dard%20Solvent
If you clean with a soft brush and WD-40, and plan to follow-up with a chain lube, you can reduce chain lube sling-off if you first remove the oil residue that WD-40 leaves. This residue seems to prevent some chain lube formulations from sticking well to the chain.,,,
Oil change
There are several schools of thought on this. Some say you should change your oil every 3000 miles; others say every 6000 miles is fine. In any case you should change it every 3 months.,
Winter storage
what to do with fluids?If your brake fluid is in need of changing do so before long-term storage. Similarly hydraulic clutch fluid should be changed before you store your bike; both systems may suffer failure if moisture gets in.
Also make sure your coolant is fresh, as deposits can form from old fluid. For service intervals, consult your owner's manual.,,,
A MOTORCYCLE , 1Cylinder ,4stoke. 24hp
2018 daelim s3 advance doesn't start
bad fuel>? just took bike out of storage?
filters clogged. air and or fuel.
cranks but does not start? cranks FAST or super slow.
"cranks fast but will not start"
has up to 10-20 causes.
if engine tests prove good (lots to fail there)
when any engine (gas) fails and is failing NOW
check spark (google or youtube how)
if spark good, try test fuel (spray can)
if this is EFI, (no such MC here USA) but if has 1 injector make sure the air supply valve is clean
ISC/IAC valve.
to find any of this, buy the motorcycles exact service manual.(SM)
when does not start open the throttle just a tiny bit and crank. this hides a bad IAC. (just this time)
it takes AIR + injections to start./ yes air can fail too.
learn how this happens, on this engine. read SM.
3/13/2023 12:00:49 PM •
Daelim...
•
Answered
on Mar 13, 2023
Not finding what you are looking for?