20 Most Recent 2006 Beta RR 125 Motard Questions & Answers


use some clean rag to wedge in between the gear teath so it locks up !
Cheers Rob

2006 Beta RR 125... | Answered on Jan 13, 2010


Yes All motorcycle chains currently being manufactured use Buna-N (Nitrile) rubber for their o-rings and x-rings and all these manufacturers recommend kerosene as a cleaner. Here's the formulation of WD-40: 80% Stoddard Solvent (that is similar to kerosene) 20% light lubricating oil and a bit of fragrance. Here's the compatibility of Stoddard Solvent with rubbers and plastics: Good Compatibility (OK for both static and dynamic seals) Buna-N (Nitrile) Chemraz Epichlorohydrin Fluorocarbon Fluorosilicone Kalrez Nitrile, hydrogenated Polyacrylate Teflon, virgin Mixed Compatibility (OK for static seals, but not for dynamic seals) Neoprene Vamac Fair Compatibility (OK for some static seals) Polysulfide Polyurethane, millable Poor Compatibility Butyl Ethylene-Propylene Hypalon Natural rubber Silicone Styrene Butadiene Consequently, WD-40 is safe and effective as a chain cleaner and corrosion inhibitor. Link: http://www.efunda.com/designstandard...dard%20Solvent If you clean with a soft brush and WD-40, and plan to follow-up with a chain lube, you can reduce chain lube sling-off if you first remove the oil residue that WD-40 leaves. This residue seems to prevent some chain lube formulations from sticking well to the chain.,,,

2006 Beta RR 125... | Answered on Nov 10, 2008


Hi, Dave for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Beta, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2012 400 RR fork oil grade and level
Beta Motorcycle Suspension Walk Through
1995 Models
Beta ALP 125 ALP 200 Complete Workshop Repair Manual 2008 2009 2010 2011... $15
http://www.betamotor.com/en/support/exploded
Beta ALP 200 Handbook

Beta Motorcycles | Answered on Sep 21, 2018


Here are 2 links.
This one has a generic wiring for the fan.

https://www.carlsalter.com/all-motorcycle-manuals.asp


This one has a '99 manual that can be downloaded. I didn't so no promises.


Free Beta Motorcycle Service Manuals for download

Beta Motorcycles | Answered on Sep 20, 2017


consult your doctor on this.

Beta Motorcycles | Answered on Feb 08, 2016


In terms of asking health questions about prescription drugs, you should ask that question of the doctor who issued the prescription or the pharmacist who filled it. I would not risk my life on the advice of random strangers on the internet who may not know their elbow from another part of their body. WEBMD.com states that grapefruit can affect beta blockers and to contact your doctor.

Beta Motorcycles | Answered on Feb 08, 2016


Hi Anonymous, I am sorry you can't find the first and best tool you ever bought for your Beta but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
How to Change Dirt Bike Fork Seals Part 1 of 3
Honda CRF Fork Seal NO SPECIAL TOOLS Change your fork seal
How to replace motocross fork seals without fork seal driver and bul
http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/suhttp://www.lewisportusa.com/manuals.htmpport/manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




Beta Motorcycles | Answered on Dec 14, 2015


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Scooter not starting or Starting and stalling
Chinese Scooters Clogged Fuel System Fix
Scooter stalls when opening up throttle 1 http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/suhttp://www.lewisportusa.com/manuals.htmpport/manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




Beta Motorcycles | Answered on Dec 14, 2015


Hi, Anonymous if your bike has been idle for months or years and does not want to start you will have to deal with a few remedies:
1. Drain and flush fuel tank, google " how to clean a motorcycle gas tank" find a couple forums to view the different options available.
2. Remove your air cleaner and clean and re-oil per Mfg. specifications.
3. Remove the carburetor, disassemble and decontaminate with a carb dip or if you have EFI remove injectors and clean with carb spray and compressed air
4. Remove fuel valve and filter disassemble and clean as necessary, remove fuel lines and replace with new ones.
5. Replace spark plug with a new one and check for spark.
For more information about your question please visit the website below. Good luck and have a nice day.
Toyota 3A Engine start up after sitting for 10 years prep work Vespa Scooter starts after 10 years of sitting

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



Beta Motorcycles | Answered on Dec 14, 2015


Hi Duncan, I am sorry you can't find the first and best tool you ever bought for your Beta but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
Timing Dirt Bike Valves
Part 18 4 stroke how to set timing and determine TDC YZ250F example
how to set and adjust the cam and cam chain timing 4 stroke engines ATV...
http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/support/manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




Beta Motorcycles | Answered on Dec 14, 2015


Hi Anonymous, I am sorry you can't find the first and best tool you ever bought for your Beta but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
Beta Motard RR 50 Track
Beta rr 50 motard
IL MIO BETA RR 50 MOTARD TRACK
http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/support/manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




Beta Motorcycles | Answered on Dec 14, 2015


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
MX Tech Tips How to check your Stator Coil
2002 Honda CRF450R Stator Check
Motorcycle stator checkout
http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/support/manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




Beta Motorcycles | Answered on Dec 14, 2015


Hi, Anonymous and the usual suspects are:
1. Idle speed improperly adjusted.
2. Inlet system air leak.
3. Leaking accelerator pump.
4. Loose low-speed jet.
5. Plugged low-speed jet.
6. Contaminated or plugged low-speed circuit.
7. Enrichner valve not seated or leaking.
For more information about your issue please visit the websites below and for specific information or questions you can reach me at xlch@mail.com. Good luck and have nice day.
How to diagnose carburetor vacuum leaks on your motorcycle
BRZ bad idle misfire no CEL stock engine
R6 motorcycle cylinder misfire power loss fault finding spark check.. http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/support/manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




Beta Motorcycles | Answered on Dec 14, 2015


Hi, Antony and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue, please visit the websites below. Good luck and have a nice day.
50CC Scooter Wont start
Startup Troubleshooting Starting Your Scooter 1 7
Fix Chinese 49cc Scooter that won start
http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/support/manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




Beta Motorcycles | Answered on Dec 14, 2015


Hi, Andy and the usual suspects are:
1. Spark plugs in bad condition or partially fouled.
2. Spark plug cables in bad condition and leaking.
3. Spark plug gap too close or too wide.
4. Faulty ignition coil, module, and or sensor.
5. Battery nearly discharged.
6. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
7. Intake air leak.
8. Water, dirt, or rust in the fuel system, carburetor and/or filter.
9. Fuel tank vent system plugged or carburetor vent line closed off.
10. Carburetor controls misadjusted.
11. Damaged carburetor.
12. Loose, dirty, or corroded ignition module connector at crankcase.
13. Faulty MAP, CKP, O2, and/or CMP sensors.
14. Incorrect valve timing.
15. Weak or broken valve springs.
16. Damaged intake or exhaust valve.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
right cylinder misfire at low revs
How To Fix Cylinder Misfire P0300 P0301 P0302 P0303 P0304 P0305 P0306
R6 motorcycle cylinder misfire power loss fault finding spark check. http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/support/manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




Beta Motorcycles | Answered on Dec 14, 2015


Casey... if you have turned your adjustment screw that much...there is no way you should have ever turned it that much...If it were me.. I would take it to a Suzuki professional and let them replace the fluid and set the adj. screws back to stock,,,you have to be a good rider to really notice a lot of difference.. and have a good sticky front tire!! Stop fooling with it!!

Motorcycles | Answered on Dec 08, 2019


What metal beams.. what are the metal beams used for Good quality powder coat last a long time... paint might..

Motorcycles | Answered on Dec 08, 2019


IF the charger is sealed you won't be able to fix it... just buy a new one...
If you do get in it.. finding the correct parts will be your problem..

Motorcycles | Answered on Dec 08, 2019


Hi, Richard for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Fuse+box+location+2005+Suzuki+Bandit+1200S&tbm=isch&source=univ&sa=X&ved=2ahUKEwj_7eD1qaTmAhWR2FkKHULmCL0QsAR6BAgJEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=RZ2RrR-tbYk
https://www.manualslib.com/manual/1053286/Suzuki-2005-Gsf1200.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Motorcycles | Answered on Dec 07, 2019

Not finding what you are looking for?
2006 Beta RR 125 Motard Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Beta Experts

ROB

Level 3 Expert

858 Answers

Ron Rak
Ron Rak

Level 2 Expert

138 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

59811 Answers

Are you a Beta Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RR 125 Motard Beta

  • RR 125 Motard Beta

Most Popular Question

need remove clutch bell

  • Motorcycles
Loading...