20 Most Recent
2008 Yamaha WR250R Questions & Answers
Electric start not working
Please check the continuity from swicth to relay is ok. Make sure that wire not short to ground. Normally relay has 4 feets which 2 feet connect to big wire and another 2 connected to small wires.. to check the relay connect the small wires to 12v terminal battery and click sound will appear. At the same time test the continuity of the another 2 feets should be less than 2ohm..
I have a problem with
the motor has seized up
back wheels only lock up it the piston is not going up and down any more and the second start really did the damage
I need a wiring diagram
This might be help full.
http://www.datatool.co.uk/pdfs/demon_user__installation_instructions_r06km.pdf
http://www.datatool.co.uk/pdfs/s4_ug.pdf
2005 Yamaha v star 650 losing power
What Exactly does the bike do when it 'loses power'? This will give clues as to where the issue could be. When was the last time the bike was given a major service? Sometimes it can be as simple as a dirty fuel/air filter or an old/worn or dirty spark plug.
9/28/2023 9:29:32 AM •
Yamaha...
•
Answered
on Sep 28, 2023
Not finding what you are looking for?