I need a Diagram on the Serpentine belt for an 2002 Eclipse. I need to know how to bypass the AC compressor.

Question edited for clarity.
Question moved to correct category.

That is not the way to fix it. You remove the AC Pump and install a bypass pulley. It keeps the same belt, route and tension.

1988*-1995 Chevy Pickup A/C Compressor Bypass Pulley

https://1autoshop.com > i-23891005-1988-1995-chevy...
Dorman's A/C Compressor Bypass Pulley is installed in place of a new compressor, significantly reducing parts and labor costs. For Use With 6-groove Serpentine ...
US$78.00 · ‎In stock
Missing: 7.4, ‎' Must include: 7.4,

Chevrolet K3500 A/C Compressor Bypass Pulley - Advance ...

https://shop.advanceautoparts.com > find > chevrolet-k...
Low prices on A/C Compressor Bypass Pulley for your Chevrolet K3500 at Advance Auto Parts. Find aftermarket and OEM parts online or at a local store near ...

People also ask

Can I bypass the AC compressor pulley with a shorter belt?

Yes, this is possible. However, unless it was the AC compressor clutch and pulley which failed, bypassing the AC pulley is unnecessary. Simply disconnect the wire to the AC compressor clutch and that should do the trick.
Oct 9, 2016

You evacuate the AC system. You remove the serpentine belt. Then you remove the compressor. But the hoses and secure the cut ends so they don't rattle around. The bypass pulley will fit in place of the compressor. Then you install the serpentine belt

purchase shorter serp belt .. for without air con
and remover the compressor

I have a 2000 E430. I just did this job because my ac compressor froze. I went to O'reilly and bought a serpentine belt 6pk2310.(different brand has it as k0910). The numbers after the part number is the length in mm or inches. Eg. 0910 = 91 inches == 2810mm. Just follow the diagram and bypass the ac compressor. Tools: 15mm wrench for the pulley tensioner. It took me 5 minutes to do this job and be on the road again. It is very easy.
On the Right is the normal diagram.

On the left is how you bypass the AC compressor on a E320/E430 2000-2002 engine.

Ford 150 250 How to Replace Serpentine Belt

scroll down to section 3 and it's the 3rd pic

good luck bypassing that AC pulley, from the diagram i dunno if you can with the way the tensioner is going to pull on the belt

You got to buy a shorter belt serpentine belt that bypasses the AC unit most car have a diagram showing whit and whit out AC.

Click on the following Link. It has the two (2) Serpentine Belt Diagrams.

I believe the Mechanic is bypassing your AC Compressor.
When you look at both of the Belt Routes you can bypass the AC with the shorter belt.
In the first Diagram: the Belt would go from the Power Steering Pump, bypassing the AC and going directly to (over the top) of the Water Pump.
In the second Diagram: the Belt would go from the Tensioner, bypassing the AC and going directly to (under the bottom) of the Water Pump.

Let me know if this helped, or if you have additional questions or information. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2004/make/jeep/model/grand_cherokee/2004_jeep_grand_cherokee_drive_belt_routing_diagram.htm

I had to do that once, but it was on an older vehicle that AC was optional. Probably your best bet would be to see if you can wrap the belt on there, but bypass the AC pump. Then just mark the belt with a white marker to get the length you need. Take it to the parts store and have them measure it with their guide. They should be able to find you one that length. If a Rendezvous came without AC, you could just go in and ask for the belt for one without AC, but I don't think they did.

its the same. but a different pulley takes place of the a/c compressor. I know DORMAN makes a few "bypass pulleys" to do this, but dont know if they make one for your truck. at the worst... you will need to get a pulley and bracket from the dealer for a truck without a/c . as long as your a/c pulley bearing is ok, you can let the belt run there.

If the air compressor is bad... check the diagram under the hood for the serpentine belt. Most vehicles will have a diagram that displays the serpentine belt path along with a part number for a shorter belt to bypass the ac compressor. If you can't find the diagram, go to your local parts store and they should be able to help.