I have a 1993 ford ranger stand.cab w/2.3l 5spd std.charging system will not charge.I've changed battery,altonator,belt,checked all the wiring in the engine compartment everything checks out fine.still not charging.please i need help.

Hi Closet, I think the problem will be with the voltage regulator or a defective alternator. I believe it will be easier to fit a service exchange unit. That will mean removing the alternator from the vehicle. Remove the keys from the ignition. I believe its a good idea to make sketches all the way through the procedure, that way you'll know what goes where. Disconnect the battery and remove the negative. Loosen the alternator tensioner until the belt can be removed. Disconnect the electrical connections. Remove the through bolt under the alternator and then remove the top bolt. Remove the alternator from the bracket. Fitting is the reverse procedure. Make sure the belt is correctly tightened, and you should be away. Regards Johngee10