At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The motor will crank over, it will just not fire up, it has plenty of charge in the battery to start the car, the starter is cranking the engine over very good, if you still fell that it is the ignition switch can you be more specific in detail as to why! thank you
Give Your Engine A New Life With A Motor Mount Replacement
A Motor Mount acts as a security mechanism for the engines, minimizing the adverse effects of frequent vibrations and oscillations that arise when driving the vehicle. No matter how powerful the engine, there is a need for some internal mechanism inside the vehicle to provide strong support to the engine and to protect it from any damage. The Motor Mount serves as essential and rigid structural support systems for the engine, enabling the vehicle to get through the irregularities of the track and other road conditions smoothly and conveniently. It secures the engine and prevents it from serious damage. Moreover, it minimizes vibration and noise on the part of engine.
Due to prolonged usage, Motor Mount will not be able to deliver its services properly. In order to avoid the risk of total breakdown of the engine, the working conditions of the motor mount needs to be checked regularly .Whenever the needs arises it should be replaced as it affects the overall performance and efficiency of the vehicle. Failure of the engine mount can seriously damage the engine .Auto-part replacements ensures the longevity of the engine and it enables you to fully utilize the benefits of smooth drive. Points of consideration for replacing and repairing
Cracking of distributor caps needs to be avoided
Radiator hoses should not be torn.
Before opening the engine, firewall must be checked for clearance.
Engine should not be jacked directly by the oil-pan, as the pan may bend.
Replacement Procedure
First of all, remove the hood and all the parts required for access to engine.
Remove the engine mount through the bolts.
Secondly loose the mount to frame bolts.
Raise the engine slowly towards upward direction to remove the engine mount brackets and then, ultimately remove the motor mount and the engine mount fasteners; the shims locations needs to be noted down.
Heat shields or Drip shields must be transferred to the new mount after comparing it with old mount.
Progressively old Mount is replaced with the new one.
Re-intallation of Engine Mount
Engine Mount brackets, fasteners and shims must be installed in their original locations.
Mount-to frame bolts should be placed in their appropriate locations.
Reinstall engine, mount through bolts loosely and allow the vehicle to run two or three times so that engine mount can adjust at their accurate operating locations.
Finally, the engine is placed in its accurate place by pushing it inside and all the bolts are tightened.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Reset the ECU? Who told you to do that? Check the basics. Does it have fuel and spark while cranking? Did those wires get put on correctly when they were replaced? Be sure the wires are correct. You can go here and pick the right engine to see how the wires should be run:
check the ground on the starter. you may have to run a extra ground wire to the starter houseing to improve the ground. i went through 3 before i found out the grounds are bad on the starters.
×