1993 Nissan Maxima Logo

Related Topics:

A
Anonymous Posted on Jun 09, 2011

Need to replace the evaporator on 93 maxima how big a job is it

1 Answer

A Miller

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Nissan Master 8,404 Answers
  • Posted on Jun 09, 2011
A Miller
Nissan Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 07, 2009
Answers
8404
Questions
3
Helped
2053027
Points
24677

Unless you have skills and equipment for this job, leave it to the pros. It is a big job WITH the skills, tools and experience. BTW, This is also a very dangerous job ... considering the freon issue.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How much is cost to replace w/pump on 1996 nissan maxima

water pump is cheap tirty dollars for it but putting in is different story runs by timming chain under the cover big job dont try this unless you have done this before .
3helpful
3answers

Water pump is it a big job

Most likely you will be doing the timing belt
as well as the water pump

So yes,big job that only an experienced
person should do.
0helpful
1answer

How do i reset my nissan maxima 2003 alarm?

Heat Shield is loose - it's flopping around. Sounds like an engine issue, but it's not.

I had the same problem on a '93 Altima & again on my 2003 Maxima a few months ago. A local garage fixed it for free both times. For the Altima, he just removed the shield. He advised that I do not park on high, dry grass as contact with the grass might start a fire (around here, cars are usually on pavement all the time - the grass thing was not an issue - and, there were no fires). On the 2003 Maxima, the garage was able to replace the rusted out clamp using some scrap material they had lying around. The heat shield was resecured into position. No more pinging.

I had Nissan take a look at the 2003 Maxima repair afterwards. They said the garage did a nice job.
0helpful
1answer

Car: honda CRV 2001 (2nd generation) my cooling coil is leaking. one guy told me if i want to replace that cooling coil, need to take out the dashboard first. so, i need the dashboard schematic that can...

cooling coil??? you mean the evaporator to the air conditioning. if it is leaking water onto the ground there is nothing wrong with it. changing an evaporator is a big job,and you must be certified to handle the freon. This one job that should be left to an expert. Plan to spend at least 900 bucks.
3helpful
1answer

Bad evaporator coil

Its a big job, The heater box needs to come out, which entails discharging the AC, removing heater hoses, and hardware at the firewall. The complete dashboard needs to be removed and swung out of the way, steering column lowered , and heater box removed and disassembled for evap replacement ( simplified )
0helpful
1answer

There is suppose to be a filter by the heater core on my 93 regal gran sport. How do I get to it to clean it.

Hello Ruckse.
Your Buick was not equipped with a filter in that model year.
If the airflow is poor it is possible that your AC evaporator over the years has developed a layer of dust restricting the airflow through the system.
The evaporator would need to be accessed to clean it.
This is a job best left to a professional as it can be a difficult job.


1helpful
1answer

Still having same problem with 93 maxima, wont idle, rpms races up and down. I was told it is probably the fast idle control or idle air control valve. If thats the case, what do I do to fix it?

Like I said before, It is difficult to get to, under the intake manifold, it needs to be replaced. There are a couple of ways to takcle this. You could try to manuver it out, or remove what ever is surrounding it to get it out. Either way it's not a 1, 2 job it's going to take some time. The last one I did I chose to manuver it out. It took me about 3 hours and I cursed at it for 3 hours! So, the option is yours. That should FixYa.
0helpful
1answer

Leakage in passenger side floor board for a 93 nissan maxima 3.0 sohc

Does the leakage smell like coolant if so most likely the heater core, if it is just plain water the evaporator core, and heater core box could have a leak from being cracked letting the condensation leak into the floor especially if the evaporator drain tube is clogged. If it only does it when it rains well roll all the windows up shut doors run a water hose all over where there is wheather strippping to see if it seeps in.
1helpful
1answer

Need to replace heater core in 2003 CE lancer. require assistance with removal procedure/method

very large job by the look of it, can download workshop manual from pdftown.com
degas air cond, drop coolant, remove dash, reomve front seats, remove console, remove heater and evaporator case assembly then get to replace heater core.
as i said big job.
0helpful
1answer

Leeking power steering line on a 93 NISSAN Maxima

We recently changed the power steering line on our 93 Maxima. Bought the hose from Advance Auto Parts. No problem.
Not finding what you are looking for?

91 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...