I suggest check this link to download Jeep-ZJ-Secc-8W-Wiring-Diagrams (page 54 and next).
Hope this helps (remember to rate this answer).
SOURCE: How do you un stick
you can temporarliy "un-stick" the ignition by inserting the key as you would you start the vehicle. then tap the end of the key a few times with the palm of your hand almost as you are trying to drive it in further. this generaly works. but keep in mind that the only fix is to replace the ignition lock cylinder. and make sure that the key is not twisted or bent because that could also inhibit the key from turning properly
SOURCE: 1994 Grand Cherokee Jeep wont start
It is likely one of your battery cables loose. Same thing just happened to me today. What you need to do is first lock the doors, and close them. Then you need to disconnect, and reconnect the battery cable, then if the security lights still blink you must use your key to unlock the door, then it should stop blinking, and start just fine.
SOURCE: speakers for 1994 jeep grand cherokee
6.5" in all the doors dash is wierd. 2.75" but i have been able to squeez in a 3.5"
Testimonial: "thank you so much, that helps me out as lot"
403 views
Usually answered in minutes!
×