Hi. Do you scanned the system? This CRDI system works whith 8 main input signals, if one of these are out, the PCM will not send pulse to fuel inyectors, if you can send me a report of parameters its possible to me to help you. [email protected]
Have you checked the electrical fuel pump ?
955 views
Usually answered in minutes!
Check The Camshaft Position Sensor.
Check The Three Lines...
One Is For 12volts...life
The 2nd Is Earth/ground
The 3rd Is The Response From.the Turning Of The camshaft. During Cranking,voltage Goes To The Ecu.that Sends Voltage To The Nozzles
×