Http://www.2carpros.com/search?utf8=%E2%9C%93&q=ford+F-150+serpentine+belt
Http://www.doocu.com/pdf/read/23494
go there enter your info,, and scroll down it will show you
Please rate my reply
SOURCE: serpentine belt routing diagram
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies....
http://www.2carpros.com/car_repair_information/year/1998/make/ford/model/contour/1998_ford_contour_drive_belt_routing_diagram.htm
SOURCE: belt routing diagram 98 zx2 2.0
1) Start with the alternator.
2) Forward to the smooth idler
3) Forward to power steering
4) Down to A/C compressor
5) Back to crank pulley
6) Forward around tensioner
7) Back glancing off of water pump
8) Back glancing off of ribbed idler
9) Up around alternator (where you started)
Good luck!
SOURCE: needa serpentine belt routing diagram for a 1990
You didn't specify the engine in your pickup. Ford put at least 5 different engines in thier 1990 pickups. You might check here to see if your engine is listed, then click on "belt routing diagram" for your particular engine and configuration.
Testimonial: "Thank you very much for your help. It was greatly appreciated."
SOURCE: need routing diagram for 1998 ford expedition
Check this...
Other details can find in 1998_ford_expedition_drive_belt_routing_diagram
Hope helps (remember comment and rated this).
Accessory serpentine belt routing-4.6L, 5.4L, and 6.8L engines with A/C
Accessory serpentine belt routing-4.6L, 5.4L, and 6.8L engines without A/C
442 views
Usually answered in minutes!
×