The shift knob is part of the shifter handle. The overdrive shift button assembly and button cover are replacable seperately. To remove the button, simply pry off the cover, pull out the button and replace. reverse the order to assemble.
To remove the shift handle, remove the ignition cylinder by turning to the run position and pushing a small pin, drill bit or allen wrench into the hole on the bottom of the trim cover hole to release the ignition cylinder. Pull the cylinder out. Next remove the screws from the bottom column trim cover and remove the upper trim. Next, remove the pin from the shifter and disconnect the electrical connector. Replace the shifter and reassemble. Good luck, please ask for more information if you can't leave four thumbs up. Have a great day!
SOURCE: 2001 Ford Expedition - starts, won't shift out of park, windows n
Check the #15 fuse in fusebox behind marked panel on left lower dash just below and left of steering column. This is only a 5 amp fuse but it controls a lot. This fixed our 2001 Expedition. 25 cents.
530 views
Usually answered in minutes!
×