SOURCE: 94 Celica GT, Fuel Problem?
The computer is what outputs that. So you want to check the wire at the computer and see what your getting. Has the motor been pressure washed or have any changes been done recently?
Thanks,
Lee
SOURCE: 95 buick lesabre crankshaft pulley removal
i had used three bolts they have to be 6mm thik and like about 6 inches long then you install some flat washers by the head and use a regular crank pulley remover, you'll see three little holes inside the groevs at front side of pulley and there is where you install the bolts
SOURCE: 94 Toyota Camry 2.2 liter Start problem
Rule 1 ....WD40 is non-flammable. It used to be an effective starter spray for diesels. Unfortunately it now contains a fire retardant to prevent accidents....so the rev you were looking for wont arrive.
It does work well with easy-start/ether though.
I suspect you found a vacuum leak and sucked WD40 into the intake....If u think u did you'll need to clean your plugs.
A strobe lamp to check the spark would be a good idea. Also if a lil squirt (VERY LITTLE) of easy start doesnt produce at least a backfire, your spark is out.
SOURCE: Can a waterpump/alternator belt become too thin togenerate power?
please have your belt check first if it is slipping the alternator light will come on .most likely is the belt the only other thing could be the alternator.
84 views
Usually answered in minutes!
×