SOURCE: 2005 dodge diesel codes!
Hi..
the Code P0340, Camshaft Position sensor problem or Loss signal.
The Code P0341, Camshaft Position sensor Intermitent Signal.
The First step you should do is : Locate the Camsahaft sensor,
Is located On Right Front of the Engine..
It use a 3 wires Connector.
1-- Pink/Yellow
2-- Brown/Orange
3-- Dark blue/Gray.
After you found it. Inspect the Connector. If is The connector in good condition.
Replace the Camshaft Position sensor...
Ok... I hope this help on your problem..
Thank you for use Fixya...
SOURCE: P0340 & P0341 CODES CAME UP THE OTHER DAY, I
how many miles on the car , if its over 70,000 miles then yes you should.hope this helps.
SOURCE: code reads P0340 Camshaft position Sensor circuit
That makes the computor think the timing is off. Replace the sensor and see if that does it. You will then have to have the code cleared (erased) or the light will come back on/stay on.
263 views
Usually answered in minutes!
×