My 2007 Honda pilot did the same thing. I took the above advice regarding the oil condition (mine was obviously poor, although I change it every 3 mos) and had it changed immediately. The engine light, VSA light, and the triangle with ! all cleared and the vehicle began to run properly again. No problems since. Thank you to Shawn Bruns!!
SOURCE: 2007 Honda Accord. Check engine and VSA light suddenly came on.
MY ENGINE MANAGEMENT LIGHT HAS COME ON AND VSA LIGHT ACCELARATER NOT WORKING
SOURCE: My Honda Element 2008 has a VSA Warning light and
It may be as simple as your oil condition or oil level. If you have poor oil in your engine the VTEC system will not operate properly and when RPMs reach 2800 or so it will buck. If everything checks okay with the oil have the code checked for your check engine light/VSA light.
SOURCE: Whle driving my 04 diesel
Hey did you ever figure out what was wrong with your car? Mine is doing the SAME exact thing
SOURCE: steps to reset 2007 honda pilot oil gauge
From page 232 in the 2007 Honda Pilot Owners Manual.
1. Turn the ignition ON.
2. Press the Select/Reset knob until the engine oil life indicator is displayed.
3. Press the Select/Reset knob for more than 10 seconds. The engine oil life and maintenance item code(s) will blink.
4. Press the Select/Reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".
SOURCE: 2007 Honda Pilot engine light on and starting a
You must make a diagnostic through out the ecu,it can be probably the crankshaft sensor.
13,745 views
Usually answered in minutes!
×