https://s26.postimg.org/gukptsw7d/headlamps.jpgClick on the link.
Usually on older vehicles, the headlamps don't use a fuse, but, fusible link, as shown in the diagram. Usually the park lamps and instrument cluster illumination are fuse protected, like the diagram shows, Not only check the fuses, use a test lite to check for voltage at fuse and at fusible link. The wires on top of switch in the diagram are voltage to headlamp switch, the wires on the bottom is voltage from head lamp switch to component.
Usually one of the wires from Battery positive goes to fusible links, at the moment, I don't have location.
Hope this helps, a little. I just want to add voltage and ground both are important.
I need to know how the color diagram looks to re-connect the headlight switch to the connector to a 19913 ford ranger 4x4?
Can someone pleas SHOW me the color wiring for the headlight switch and the digaram for the connector to the switch for a 1993 ford ranger 4X4$
I have a disgruntled tenant who pulled my lighting controller apart and switched wires on it to sabotage me i found instruction manual with diagram but doesn't show where dual trigger cables hook up need a tutorial or a good diagram help please
×