How to set cam timming suzuki raider150 - Reno Suzuki Cars & Trucks

I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals

• G16B (16valve is here)

http://www.fixkick.com/t-belt/16-fast-belt-install.html

note false timing marks on the cam cog wheel.
do not mess that up.

this page even has the FSM pages, to read. on G16B

Do you have normal compression in all cylinders ? An exhaust valve could be burned or sticking open.

get #1 piston on top dead center and exhaust cam so valves are closed ,get intake valves open

TIMMING IS NOT ADJUSTABLE. IT IS ALL COMPUTER CONTROLED. THE ONLY TIMMING IS THE MARKS ON THE CHAIN AND GEARS.

Should be a dimple or dot on each gear crank one points up cam one points straight down they should line up perfecly.

Timing belts don't while because they don't slip! Could be the water pump/alternator belt.

timming marks on cams face each other 3 and 9 o clock crank mark at about 6 o clock mark in cover and sump auto adjuster arrow should be in v mark to set this requires turning water pump by loosening water pump bolts slightly be warned some times this causes pump o ring seal to leak if turning.

TIMING BELT SHOULD BE 60,000 MILE CHANGE

The suzukiinfo.com site has a whole heap of free genuine manuals you can download and print out.
www.suzukiinfo.com