the "Reduced Engine Power", problem causes the PCM to disable "Service Stability Control" and "Traction Control" turning on the warning lights to come on for those systems . The reduced engine power is because of a problem with the electronic throttle control system or as GM calls it TAC system .
Reduced Engine Power Mode
When the PCM detects a condition with the TAC system, the PCM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
• Acceleration limiting--The PCM will continue to use the accelerator pedal for throttle control, however, the vehicle acceleration is limited.
• Limited throttle mode--The PCM will continue to use the accelerator pedal for throttle control, however, the maximum throttle opening is limited.
• Throttle default mode--The PCM will turn OFF the throttle actuator motor and the throttle will return to the spring loaded default position.
• Forced idle mode--The PCM will perform the following actions:
- Limit engine speed to idle by positioning the TP, or by controlling the fuel and spark if the throttle is turned OFF.
- Ignore the accelerator pedal input.
• Engine shutdown mode--The PCM will disable fuel and de-energize the throttle actuator.
© 2017 General Motors Corporation. All rights reserved.
Drive by Wire training Your best bet , take it to a GM dealer
×