Repalcing the starter
Instructions for 4.9 Liter V8 Disconnect the negative battery cable.
Raise and safely support the vehicle securely on jack stands.
Remove the starter motor shield.
Remove the exhaust front and rear pipe assembly.
Remove the flex-plate inspection cover.
Disconnect the solenoid 'S' terminal nut and battery cable nut.
Unbolt the starter motor mounting bolts, and remove the starter motor.
To install: Install the starter motor, and tighten to 32 ft. lbs. (43 Nm).
Install the solenoid 'S' terminal nut. Tighten the nut to 35 inch lbs. (4 Nm).
Install the battery cable nut and tighten to 12 ft. lbs. (15 Nm).
Install the flex-plate inspection cover, the front and rear exhaust pipe assembly and the starter motor shield.
Lower the vehicle.
Connect the negative battery cable.
Here is antoher set of instructions, both are correct.Things You'll Need:
Wrench set
Jack
Jack stands
Socket set
Ratchet
What size are the bolts?
×
1,983 views
Usually answered in minutes!
idid not recive any instruction or a piture of the starter
×