No symptoms to tell?
just how to reset the nebulous OD.?
of the transmission has issues.
check fuses first
levels
then scan it, if the scan tool show errors, called DTC errors
then push the reset button on said tool and see if they come
back , if they do they are REAL , time to fix it.
get it serviced.
SOURCE: 1995 jeep laredo overdrive is not shifting
Your overdrive should kick in at about 45mph, pretty much at or about 2000rpm. To see if it engaged, lightly touch the brake pedal and it will disengage.It should also disengage when you mash the pedal down to go into passing gear, and re-engage when conditions "normalize" again. You can tell that it has engaged because the tach will drop a few hundred rpms. If it's not doing this, a simple trans oil change (with filter) may correct the problem. OD is activated by a shift solenoid on the valve body that may be a bit gummed up.
95's show a shift control module on some diagrams I've seen, but not on others. I read this as a possible "half-year change" So you may or not have one. If you do, I'd check that as well!
746 views
Usually answered in minutes!
×