If you have both ' original ' keys that came with the Jeep - you can try and flip them through the system and get the Jeeps computer to accept them,, take both keys and sit in the drivers seat -- with one key put it in the ignition and turn to the on position - wait about 15 -20 seconds, remove the key and then put the other key in and turn to the on postion -- wait 15 to 20 seconds,remove the key and now put the first key back into the ignition and turn to the on postion and wait 15 to 20 seconds,,, now try and start the Jeep.
now if one of the keys is not an original key ( a clone key ) -- then this might not work,, and you will need a automotive locksmith to come out and re-program your keys to the Jeeps computer. since you already have keys, this is not a very expensive trip -- you will just be charged for the service call and the programming of the Jeep.
c...
245 views
Usually answered in minutes!
×