The turn signal inicator light on the dash for the drivers side flashes rapidly, turn signal nor break light will work on drivers side back , but the tail light works fine. Bulb and fuses have been replaced. what could be causing this problem?
Could be the flasher.
Replace the socket, and I would suggest not using your signals while you have the cruise control on. There is a recall on other years cavaliers for the turn signal socket and they said it causes overheating in it when the cruise is on.
I fixed the problem by replacing the socket that the bulb fits into it just unplugs i got a new socket and plugged it into the wiring harness and everything is working fine......
I had the same problem, so I got a new socket. It works fine now.
Short in a wire
3,941 views
Usually answered in minutes!
changeg fuses checked bulbs still no correction
I have the exact same problem with the signal light. Thought it was the bulb at first. Guess it couldn't be that simple. The fuses are fine but it wont flash. I figured it had to be a fuse problem but I don't know where the short could be because the wires look like they are in goo condition. What do you suggest?
I have trhe exact same problem on a 2001 chevy cavalier
Front driver side turn signal does not blink, the rear blinks very fast. The brake lights work fine. Front bulbs have been replaced, problem still exists. Thanks!
I replace the rear tail light bulb and after that the dash light and tail lights would not turn on
Dash lighting works, fog lights out
Both turn signals and break lights wont work on the passenger side
tail lights flash like hazazrd lights when signals are used
Drivers side mirror turn signal does not work
Ok so my buddy has a 07 yzf600r he had his regular light swept out for flush mnt one and led tail light all worked fine so we put on mirrors w signals in them and tried hooking them up had problems one side would work the other wouldn't and then all would flash together at same time so we got led relay side turn LEDs and the same thing is happening but now if we take regular factory turn signal and touch the wires with others and turn the opposite blinker on the led turns on that side work perfect but if you turn on the side with factory one hooked up with other LEDs doesn't work they all flash at same time dose anybody know what's going on out words right now
back right flash signal not working.
has led tail lights
×