2000 Jeep Grand Cherokee Logo
Posted on Dec 08, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How do I change the rear differential? - 2000 Jeep Grand Cherokee

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Scholar:

An expert who has written 20 answers of more than 400 characters.

New Friend:

An expert that has 1 follower.

  • Expert 142 Answers
  • Posted on Dec 08, 2010
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Scholar:

An expert who has written 20 answers of more than 400 characters.

New Friend:

An expert that has 1 follower.

Joined: Dec 02, 2010
Answers
142
Questions
1
Helped
33133
Points
414

Jack it up so the rear axle is off the ground. unhook the ebrake cables at the vehicle unbolt the rear driveline remove the rear wheels unbolt the rear shocks with the jack under the center of the rear end, disconnect any anti lock wiring plugs remove if it has leaf springs remove the u bolts that bolt the rear end to the spring by taking off the nuts from the bottom. lift out rear assembly . If it has springs remove the springs after the shocks are unmounted from the rear axle. piece of cake reverse the procedure

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ok so I changed the speed sensor by the transfer case on my 2001 Jeep Cherokee sport (xj) and I'm having trouble finding the other speed sensor location any advice?

On a 2001 Jeep Cherokee Sport (XJ), there are typically two speed sensors: the vehicle speed sensor (VSS) and the rear axle speed sensor. The VSS is located on the transmission or transfer case, while the rear axle speed sensor is located on the rear differential housing. Here are some tips to locate the rear axle speed sensor: 1. Locate the rear differential housing: The rear differential is typically positioned towards the rear of the vehicle, underneath the rear cargo area. Look for the large metal housing connected to the rear axle. 2. Identify the speed sensor: The rear axle speed sensor is usually mounted on the differential housing itself. It will have a wiring harness connected to it. 3. Follow the wiring harness: Trace the wiring harness from the rear axle speed sensor. It will lead you to a connector that is plugged into the vehicle's wiring system. The connector may be located near the rear axle or along the frame. 4. Inspect the differential housing: Look closely at the differential housing for a small protrusion with a threaded hole. This is where the rear axle speed sensor is installed. It may have a retaining bolt securing it in place.
0helpful
1answer

How and were to replace gear oil

How to Care for Your Car's Differential - Popular Mechanics

www.popularmechanics.com/cars/.../how-to-care-for-your-cars-differenti...
Apr 3, 2013 - The differential oil lubricates the ring and pinion gears that transfer power... Checking and changing the differential oil in a light truck is actually ...

Differential / Gear Oil Replacement - YourMechanic

www.yourmechanic.com > Auto Repair and Maintenance Services
How much does Differential/Gear Oil Replacement cost? Get an estimate instantly. ...Some vehicles have a front differential and others have a rear differential. ... I'm from out of town and didn't know who to contact to fix a truck I was borrowing.

How to Change Transmission Fluid & Filter ' Step by Step

www.transmissionrepaircostguide.com/change-transmission-fluid/
A do-it-yourself transmission fluid change is an affordable way to maintain and ... It is often recommended that you change the fluid in your car every 30,000 to .... lifted up my truck with a jack, Jack stands, blocked the rear tires and went at it just ...

How often gear oil should be changed - Testing Autos


0helpful
1answer

Need recommended Fluid specs and amounts to change oil for 1996 Toyota Tacoma 4 wheel drive front and rear axles

Hello there,

From this page https://www.worldsbestoil.ca/product-cross-reference.php?year=1996&make=TOYOTA&model=TACOMA&engine=2.7L&vin=1



Extract.......

.Engine, 2WD, with filter - 5.4 quarts [1]

Engine, 4WD, with filter - 5.3 quarts [1]

Cooling System, Initial Fill - 9 quarts

AMSOIL Antifreeze and Engine Coolant

Automatic Transmission, A340E Initial Fill - 1.7 quarts

Automatic Transmission, A340F Initial Fill - 2.2 quarts

Automatic Transmission, A43D Initial Fill - 2.6 quarts

Automatic Transmission, Total Fill

4 speed A340F - 10.4 quarts

4 speed A340E - 7.7 quarts

4 speed A43D - 6.9 quarts

Manual Transmission, - 5.3 pints

Differential, With ADRD Front - 2.6 pints

Differential, Without ADRD Front - 2.4 pints

Differential, 2WD Without LSD Rear - 6 pints

Differential, 4WD Extra Long Rear - 4.5 pints

Differential, With LSD Rear - 6.4 pints

Differential, Standard Rear - 6 pints

Transfer Case, - 2.2 pints\'
1helpful
1answer

Disconnected rear differential

You must have a 4 Wheel-drive. You should have a driveshaft for that end of the vehicle and you should not let the Mechanic keep it. The rear unit must have a bad Pinion bearing or more damaged parts. Some of parts can "freewheel" without having power going through them.

But the metal shavings from broken parts can travel inside the differential and cause more problems. You don't always need the 4-wheel drive function and you do not have it since the Mechanic disconnected it.

Sometimes it can be what is called an "axle" bearing. Each side has this part so you have 2. The noise levels for this part can also change when the 4 wheel drive is engaged.

Make sure the rear differential has lube. Read the Web for articles about your vehicle. Search "2003 Ford Escape rear differential".

There is a Salvage yard site called Car-parts.com which is good for locating used parts like differentials. One would need to match the same gear ratio as the front.
3helpful
1answer

2006 tribeca subaru rear differential light is on

The rear differential warning lamp tells you if the rear differential fluid is too hot. In my case (others) and probably yours case too, it is because the wire connection has become dirty or corroded.

Tools: 180 to 220 grit sandpaper (or dremel with wire brush attachement), flashlight, paper towel. Optional: dielectric grease

Repair directions: slide under vehicle from the back (I didn't need to jack it up at all, you may want to or need to). The differential is the center section of the rear axle. On the top of the differential you will see a single wire connection. Pull the plastic wire connection off the spade. use the paper towel to clean any goo off the spade, then clean it using the sandpaper. Put dielectric grease on the connection (optional). Replace the wire connection. Your problem is solved!

If you have not changed or checked your differential fluids, you should do so. The rear dif uses a very common 80W-90 gear lube, but the front dif uses a rare type that will probably require you get it changed at subaru.
2helpful
1answer

Where is the fill plug on the diffirential on a 1999 jeep grand cherokee laredo"

How to Fill a Rear Differential
You may need to add fluid to your differential due to leaks or changing seals, or it may be time to change out the gear oil completely. Either way, it's just a few steps to fill the rear differential and get your vehicle back out on the road!This article will explain how to fill a rear differential. jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Difficulty: Moderate
Instructions and Things You'll Need:
  • 3/8 inch drive ratchet with extension
  • 2 quarts gear oil (gear lube, differential fluid)
  • Side cutters
  • Oil drain pan
  • Shop rags
  • Flashlight or shop light (optional)
  • Lock tight (optional)

Filling a Rear Differential
  1. Be sure the car is raised on four jack stands and is level. It will be more difficult to fill the differential if you've only got it raised in the rear.
  2. Place an oil drain pan underneath the plug to catch any leaks or drips. Keep shop rags handy for any spills.
  3. Check your service manual for the amount of fluid your differential needs, if you're completely refilling the system. Two quarts should be enough in most cases.
  4. Remove the spouts on the gear oil containers. Peel off seals, then replace spouts. Use side cutters (or any cutting tool you've got handy) to clip off the top of each spout.
  5. Remove the differential fill plug using a 3/8 inch drive ratchet with extension. (Some models may require a hex key or screwdriver, but the 3/8 inch is the most common plug design.)
  6. Take the gear oil container and fit the spout into the fill hole. Pour the fluid inside. You can gently squeeze the bottle to speed the process. Repeat with a second bottle if necessary.
  7. Fill the differential until the fluid starts draining back out of the hole.
  8. Clean and replace fill plug. Use lock tight (thread locker) to help seal if desired. You can see my eHow article "How to Replace Rear Differential Fill Plug" (video) for more information.
  9. Take the car for a drive around the block to get the gear oil moving. When you return, check underneath for any leaks from the fill plug or differential cover.
Hope help with this.
0helpful
3answers

What tuneup should I do at 65000

no tune up needed until 100000 miles. run a couple of fillups of Shell or Chevron premium gas thru it to clean out fuel system and clean engine. Walmart fuel station also have gas additive you can buy with your gas.
1helpful
1answer

Change differential fluid

pull the gear cover off the front and on the rear probably the same procedure if the is not a drain plug
0helpful
2answers

Trying to find out how much oil the Triton V-10 takes when I do my oil change? I cant seem to find it or anyone who knows

It should be listed in the owners manual, but because of different oil cooler setups you may have to do the change yourself and add oil until the correct level is established..... for the first oil change.
Most likely 7 liters,but start with 5,run the engine to fill the oil filter,let it sit for 5 mins and recheck and fill to full.
Note the amount needed for next time.

0helpful
1answer

Ford Explorer differential...

They were talking about having a locker added too the rear differential. Yes you can have a posi added if I was you I would go with a selectable rear locker, ARB, OX are just to name a few. Any good off road shop can help you withe the parts and install.
Not finding what you are looking for?

239 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...