At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Some isuzu have GM components it may have a mass air flow senser,look in the large intake hose from air filter box to throttle boddy ,if not some are bolted to firewall others bolt to intake ,look at the vacuum diagram if it does have a map sensor this diagram will show the vac hose for it
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Located on top cylinder on transmission side.The MAP sensor is located either directly on the intake manifold or it is mounted high in the engine compartment and connected to the intake manifold
Check out related help links to MAP sensor and its problems:---- Click the link below:-----
I don't mean to be critical, but if you do not know where the MAP Sensor is, then you could not possibly have tested the MAP Sensor circuits. If the MAP Sensor circuits have not been tested, then there is no way that anyone can be certain that your vehicle actually needs a MAP Sensor. (Many MAP Sensor codes cannot be fixed by replacing the MAP Sensor itself.) Then again, you might just get lucky.
To answer the question you asked, The MAP Sensor is located on the passenger side of the intake manifold near the rear of the engine. You must remove the doghouse to get to it.
MAP SENSOR ON TOP OF INTAKE BESIDE THE SUPERCHARGER. TAKE THE NEW MAP SENSOR USE IT FOR REFERENCE LOCATING OLD MAP SENSOR. WHEN YOU SEE IT ON INTAKE IF MATCH UP WITH OLD MAP SENSOR THEY MATCH UP YOU LOCATED THAT IT.
MAP SENSOR LOCATION ON THE THROTTLE BODY.YOU HAVE TO REMOVE THROTTLE BODY MOUNTING SCREWS TO REMOVE.MAP SENSOR WILL HAVE A VACUUM LINE HOOK TO IT.THAT WILL MAKE LOCATING IT EASIER.
The map sensor is located on the side of the intake manifold plenum. Look to the left of the power steering fluid canister and you will see it with a 3 wire connector. Hope this will help you.
×