SOURCE: I need a routing diagram
To get you the right diagram I need to know if you have the 2.5, 3.0 or 3.3L engine in your dynasty.
Thank you,
Lee
SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan
3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
SOURCE: need serpentine belt routing diagram for a 1991
The diagram should be on your upper radiator support or on the inside of the hood. It's black with a white diagram.
SOURCE: looking for serpentine belt routing
Try in this site... diagrams/dodge/dynasty/1992
Good luck (remember to rate this answer).
333 views
Usually answered in minutes!
×