How do you change driver side headlight bulb - 2007 Volkswagen New Beetle Coupe

Danielle, On the driver side you may have stuff in the way, which may have to be removed, to change bulb. Sometimes it is easier to remove headlight then change bulb and reassemble. Videos attached make it look fairly easy to change he bulb with out removal of headlight.
Check the attached links,instruction and guides, Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Suzuki Grand Vitara Headlight Bulb Replacement
Headlight Change 1999 2005 Suzuki Grand Vitara 2003 Suzuki Grand Vitara 2...
Auto Repair Maintenance How to Replace Headlight Bulbs
How to replace Suzuki Grand Vitara Tail Light Bulb

Here's a link on replacing your light bulb on your VW. Sparky Answers 2001 VW Beetle Changing The Low Beam Headlight Bulb HERE'S A VIDEO,ALSO How To Change Head Light Bulb VW Beetle

HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan.../302674-help-headlight-not-working-eve...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement
15 posts
Jan 22, 2009
Low beams don't work but High's do
8 posts
Mar 20, 2005
More results from www.nissanclub.com

Instructions

1. Make sure the the headlight switch is in the off position.
   
2. Open the bonnet to the Escort.
   
3. Locate the back side of the headlight assembly to the headlight that needs to be changed (driver's side or passenger side) from inside the front the engine compartment.
4. Unplug the wires from the back of the bulb.
5. Turn the back of the bulb housing counterclockwise one-third of a turn until the bulb and wire harness are released from the headlight assembly.
6. Unplug the wire harness from the bulb socket.
7. If using Halogen headlight replacement and be careful not to touch the glass bulb part. Handle it by the socket at the bottom of the headlight.
8. Plug the wire harness into the new headlight replacement.
9. Align the tabs on the headlight housing to the slots in the headlight assembly and insert the bulb into the assembly. Twist the headlight one-third of a turn clockwise until it locks into place.

You have to take the black plastic top off under the hood on the front.....than you take the whole headlight out, I believe it's only two bolts...there is opening for each light and they are pretty simple to change.

the h 7 bulb is a quartz halogen bulb and if touched with the bare fingers has an extremely short life
you have to use gloves when handling the bulbs as the oil from the fingers reacts with the glass when in use and blows the bulbs
they will also blow from bad/ loose ground points and if allowed to arc ( as in welding ) will fail quickly
you should get 12 volts to both bulbs at one terminal while the other is the grounding wire
check for problem relays in the power wire

You may have blown a fuse, check fuses first then before you try to replace the bulb again check for broken wires or the correct bulb

This video will show you how to replace the headlight and also the bulb in the headlight of your HHR">

TEST
remove both bulbs from the lamps but leave them on their wires switch on and see if the bulbs are still different brightness if not they the passenger side lamp housing has damaged mirror is dirty or missalined and needs adjustment. if they are different brightness then this may be a earthing problem.

how to change driver side headlight bulbs?