Look in owners manual --and inside cover for info
On this website you find fuse box diagram and description for Dodge Caliber (2008)
https://www.carknowledge.info/dodge-caliber-2008-fuse-box-diagram/
https://www.autogenius.info/dodge-caliber-2008-fuse-box-diagram/
SOURCE: windshield wipers 2008 dodge caliber
Go take it to the dealer you should still have a full warranty. If you want to try and do it your self you could void that warranty.
SOURCE: CHRYSLER SEBRING - WHICH FUSES GO TO/AFFECT WHAT PARTS OF CAR
the diaghram for the fuses will be on the back of the fusebox lid that you have removed and will tell you which fuse is for what
SOURCE: 1996 ford mustang fuse box diagram?
just pull each fuse replace the ones that are burnt out you got to locations for fuses under dash driver side under the hood in distribution box
SOURCE: diagram to show how to get the serpentine belt of
There is a diagram in the engine compartment itself that displays belt routing and removal.
When you look at the engine and all the pulleys that the serpentine belt goes around, one of those pulleys will have a "tensioner" on it. On that "tensioner", there should be a square looking slot for you to insert a socket extension to or you may have enough room to just use the socket drive handle itself.
Rotate counter clockwise until you have relieved enough tension to slide the belt off. Reverse the procedure for re-installation.
SOURCE: I need a fuse diagram for a 2007 dodge caliber!
your best bet is to turn your key on and check all of the fuses with a test light if you have a blown fuse you will have power on one side and nothing on the other side of the fuse ,some fuses will show nothing on either side that might be a spare fuse or a circuit not turned on at the time
2,276 views
Usually answered in minutes!
×