Question about 2004 Chevrolet Express

1 Answer

How do you change the rear wheel bearings on a 2004 chevy express 1500 van?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

Axle Shaft Bearing & Seal Removal & Installation To Remove:

  1. Raise and safely support the vehicle.
  2. Remove the axle shaft.
  3. If replacing only the seal, remove the seal using a suitable seal removal tool.
  4. If replacing the seal and bearing on the 8.6 inch axle, install the slide hammer and adapter behind the bearing and pull out the bearing and seal together.
  5. If replacing the rear axle shaft seal and the bearing on the 9.75 inch axle, install the J 29712 or equivalent bearing puller into the axle housing behind the axle bearing.
  6. Remove the axle shaft seal and the bearing by tightening the nut on the J 29712 bearing puller.
Use a slide hammer, bearing puller and adapter to remove the old axle bearing How do you change the - 88457g81.gif

To Install:
  1. Install the axle shaft bearing using a suitable size driver. Drive the bearing into the housing until the tool bottoms against the tube.
  2. Lubricate the seal lip and install the seal with a suitable seal driver. Make sure the seal is fully seated in the axle tube.
  3. Install the axle shaft.
  4. Fill the rear axle with the correct lubricant.
  5. Lower the vehicle.
prev.gif

Posted on Oct 18, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque on 2006 Chevy express 1500 van front wheel bearings


My info says, 173 ft lbs. 03--06, express and G series 1500.

Mar 31, 2018 | Cars & Trucks

1 Answer

How to fix rear wheel bearing on 2002 chevy express van 1500


Remove the rear differential cover. You will see a large pin in the center that has to be removed, spin the diif until you see the bolt that holds it in. The pin should just slide right out. Assuming tires are off. Push the axle towards the center. On the end of the axle is a c clip that has to come out. Magnetic works well for these. Pull the axle out. Remove the bearing. There are special tools to get them out.

Dec 26, 2015 | Cars & Trucks

1 Answer

How do I change the brake light on a 2004 Chevy Express van?


Just go onto google and type in how do I change a brake light on a Chevy express van you will be shown a video of how to do it hope this helps

May 30, 2014 | 2004 Chevrolet Express

1 Answer

2006 chevy express 2500. While changing the brakes on my van, a rivet and clip pulled through the rear wheel dust plate, I'm unsure on how to fix this as now one half of the shoe is rubbing agains


get a washer welded in its place but if you dont want to go that way you will need to pull the brake shoes the drive axle just to get to the backing plate so you can remove the old one and install a new one

Jan 16, 2013 | 2006 Chevrolet Express

1 Answer

Can't remove front wheel bearing hub on 2004 chevy express 1/2 ton. any suggestions


I presume you are trying to REPLACE the hub assembly? If so, you do not have to worry much about dammaging it. Simply take the three bolts out of the inboard side of the steering knuckle and beat it with a large hammer.

If your van is equiped with All-Wheel Drive, you must remove the large nut from the axle first to do this. Then the axle can be pushed in far enough to gt clearance to get the bolts out of the steering knuckle that hold the bearing assembly. Two-Wheel Drive is much easier.

It is also recommended that you disconnect the wheel speed sensor wire harness before trying to get the hub loose. Damage to the vehicle harness can result if the bearing comes out suddenly and pulls on the cable.

Nov 08, 2011 | 2004 Chevrolet Express

1 Answer

2001 chevy express van 1500, rear blower motor location


Inside the van, all the way to the rear, on the side, will have a nice looking panel over it, remove panel and you'll see blower motor, held on with about 6 small screw's.

Aug 05, 2010 | 1999 Chevrolet Express

2 Answers

2004 chevy 3500 express passenger van transmission


if ur replacing it remove front grill disconnect both lines and carefully remove retaining clips from radiator if replacement is original eguipt mount & reconnect --if its a universal follow instructions usually cut off fittings and use clamps and hose to hook up

Oct 27, 2009 | 2004 Chevrolet Express

2 Answers

Disc Brake Emergency brake adjustment on 04' Chev Express Van


Continually push the brake pedal to set the brakes. (With park brake off). Brakes are self adjusting and will adjust to correct position.

Mar 29, 2009 | 2004 Chevrolet Express

Not finding what you are looking for?
2004 Chevrolet Express Logo

2,333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...