How can install a serpentine belt on my 92 ford mustang,but i dont have a air conditioner unit

Here yeah go 1989 Mustang serpentine belt

Fox Mustang Alternator Easy Alternator Upgrade 5 0 Mustangs Super Fords...


hopefully that helps

Have a look at this page here.
Can you help with this Ford 2006 Mustang question posted on FixYa

if the serpentine belt is original then have it changed as it is probably hard and not gripping properly
it is a reason that the ac compressor will not be at full efficiency , just like power steering not as good as it should be and alternator not charging properly
the inspection of the belt is in the grooved section and it shows minute cracks in the groove ribs then it is overdue for a change

Do you know if the compressor stops working when you are getting hot air ? The computer will turn off the compressor when you are at wide open throttle. Could be the throttle position sensor or a vac leak among other things.

I can't find that Ford had a 3.6L in 2000 for Mustang.
Here's a link to a 3.8L
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7002

Here's a 4.6L diagram
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8016

if you mean the cooling fan, leave the serpentine belt on and loosen 4 bolts at the pulley, then remove 2 bolts that hold on the fan shroud so that it can be lifted up a bit to give room for fan to come out as assembly( fan and fan clutch)

92 FORD PICK UP ALL 7.3 BELT WRAP

hi , this link shows the 7.3 belt routing scroll down the page at that link for the 7.3 .

J5

relax belt tension regulator, install belt. then
tighten tension regulator.

http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=FORD&model=MUSTANG&year=1986&year_from=&year_to=&engine=BJ3&l=n

This should Help. Please Rate My Response! Thanks!