What does the b14 maintenance code mean for a 2006 honda pilot?

If a b14 code pops up on your Accord, you can fix it as follows:
1. Replace engine oil and filter
2. Check the tire pressure and rotate the tires
3. Check drive belt, install a new air cleaner element, and replace the dust and pollen filter
4. Replace the transmission fluid if required
5. Replace timing belt and spark plug if need be
6. Change the engine coolant
7. Also, replace the back differential fluid
Note: if the problem gets resolved at step 1, you don't need to move forward with the rest of the steps.

My A14 Timing Belt service experience - Honda Ridgeline Owners ...

www.ridgelineownersclub.com > ... > Under The Hood / Performance
Apr 30, 2011 - 11 posts - ‎5 authors With the the dreaded A14 MM light on, I quickly panicked at the thought of the cost. After much ... 2008 *Former Ridgeline Owner Dark Cherry Pearl ... 2006 Pilot EXL-RES in BSM. speedlever is .... code is On. HTML code is Off ... A14 parts nightmare
8 posts
Apr 21, 2015
DIY Valve Adjustment on 2006 Ridgeline w/photos
11 posts
Nov 25, 2012
Maintenance Reminder code A36
11 posts
May 10, 2010
a14 service minder problem
3 posts
Jan 12, 2010
More results from www.ridgelineownersclub.com

Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.

1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
2. Hold the button for at least 10 seconds, until the indicator resets.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:

1. Turn the ignition switch to the ON (II) position.
2. Press the select/reset knob repeatedly until the engine oil life is displayed.
3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.

All information is taken from the Honda Pilot owners manual.

This is a Honda service code alterting you that its time to perform these services. A136 means;

A= replace engine oil
1= rotate tires
3= Replace the transmission fluid and transfer fluid (if equipped)
6= Replace the rear differentialfluid (if equipped).

The B14 on your Honda Civic 2006 can be fixed by following these steps:
1. Replace engine oil or if need be, replace engine oil as well as the oil filter
2. Rotate the tires and check that they have the recommended pressure
3. Replace the air cleaner element, and the dust and pollen filter, also inspect if the drive belt is in perfect condition
4. Replace the transmission fluid
5. Replace the timeing belt if damaged and the spark plugs, also adjust the valves and inspect the water pump
6. Replace the coolant
7. Replace the differential fluid
Ideally, you should check the error status after each step, and stop when it goes away. However, you should ensure that all parts and fluids are as per requirement.

Major caveat to joserivera34's answer: For "B4" it depends on if the car has a belt or chain. The Accord V4 has a chain and therefore there is no timing belt replacement. The V6 has a belt.

this obd2 trouble code table can help you understand the meaning of code.

Letter B is most likely for Body Codes

Not a generic code

Need to check with a repair shop that
has ALDATA,Mitchell, or similar Data Base,
or have a scanner put on it,it will bring it up

A Scan Tool is not a code reader, you hear about
at the parts store

It is time to change your oil and filters, including the fuel and air filters.

with the key in acsessory position press the gas peddal to the floor three times then turn thye key off and then start the car that should clear the light