Probably the switch input to the BCM is bad . door ajar switch .
The BCM is also capable of commanding other vehicle systems to control functions that are not directly wired to and/or controlled by the BCM. The BCM accomplishes this task by sending specific messages on the class 2 serial data link. The vehicle system capable of performing such function will respond to the BCM message.
The BCM controls/monitors the following functions:
• Audible warnings
• Indicators control
• Interior lighting
• Exterior lighting
• Power/automatic door locks
• Keyless entry
• Content theft deterrent
• Personalization
• Serial Power Modes
• Electrical Power Management
Audible Warning
The body control module (BCM) provides the following audible control functions. Some audible control functions may be controlled by other systems through the class 2 serial data link:
• Headlamp on reminder
• Key in ignition reminder
• Personalization mode
• Delay locking indication
• Keyless entry programming/diagnostic mode indication
Indicator Control
The body control module (BCM) provides the following indicator control functions through the class 2 serial data circuits. Some indicator control functions may be controlled by other systems through the class 2 serial data link:
• Door ajar
• Liftglass/endgate ajar
• Park brake
• High beam
• Park lamp malfunction
• Service vehicle soon
• Personalization mode
• Security LED
• Battery
Door Locks Go Crazy 1
Door Locks Go Crazy 2
Door Locks Go Crazy 3
×