Want to replace the window crank on 1999 saturn sl. door panel has been removed and window crank handle is off. cant figure out how to remove part attached to window track.

SOURCE: broken outside door handles (front

I have the same problem on a Toyota Tercel 1997. I am trying to remove the door panel with the door closed (I can not open the door because the door knob is stuck in the lock position). I think I will have to cut through the panel. Have you found something ? My e-mail is [email protected]

SOURCE: 1994 vw jetta drivers door window crank inside handle removal(man

You'll see a small ring on the inside of the crank where it meets the panel. That ring holds the crank in place. To remove the handle simple push the ring up and the handle will slide right off. Depending on the position of the crank the ring might have to be pushed up down or sideways. Hope that helps.

SOURCE: power window fell down inside door

there are clips holding the door panel around the edges. to remove the clips, use a small screwdriver to feel for them, then use another one to pull the panel on the other side. Pull outward from both sides of the clip until it comes loose. Do this repeatedly, and then loosen and remove the arm rest.

Pull the window up and have a helper hold it as you work it back into the track.

Good luck.

SOURCE: Inside door panel removal

u need a window crank remover tool get at ny parts store

SOURCE: How do you remove the passanger side door panel of a 2006 passat?

Take it off the door handle side of the cable, not the latch side.