1992 Ford F250 Logo

Related Topics:

Posted on Apr 17, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1992 F250 460 engine, AOD trans, 84000, miles.....Starting off from a dead stop, then within the first 5 to 8 mph, the tranny sometimes will give a lurch or clunk or something, then go into gear. It only happens from a dead stop, and then, only sometimes. Never when I am moving and have to shift up or down. A tranny guy told me to drop the pan and change fluid and filter. Also, while it is opened, to check for any broken springs. He said that there is a short but very stiff spring that helps in shifting and is notorious for breaking. Would that be true and if so, where can I get a new one?

1 Answer

don-ohio

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

  • Ford Master 946 Answers
  • Posted on Apr 18, 2017
don-ohio
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

Joined: Aug 06, 2009
Answers
946
Questions
2
Helped
238888
Points
2123

Check motor and transmission mounts and U-joints. don-ohio

5 Related Answers

Anonymous

  • 64 Answers
  • Posted on Aug 21, 2008

SOURCE: 1996 TBird 4.6 auto/overdrive trans problem

Your transmission fluid contain water,thats why the colour of the fluid changed to pink.And of such the clutch is slipping causing the engine to reve up before shifting - Check transmission cooler.

Ad

Anonymous

  • 1 Answer
  • Posted on Sep 27, 2008

SOURCE: Trans clunking when slowing down

Sounds like youi may have a few serious problems going on to have that kind of back lash occuring at higher speeds. I have experiance with low spped clunks on Bronkos and your type of vech being a car dealer. One you might try for low speed clunk on take off and braking at stop likts just completeing a stop? Pull the drive shaft and lubricate the splin - two check your leaf springs for weakness and wore bushings - take a look at your shocks - three u bolts holding springs to rear axle housing may be letting the axle housing actually dip or tweak or all those thing in combination - now you may have some serious slop in the pig - transfer case may be causing that clunk - as far as high spped clunk and activity you have a serous problem and you just might drop the transferr case have an accident fliping over..............Mike South Bend Indiana don't just keep driving and making problem worst...........

Anonymous

  • 1 Answer
  • Posted on Nov 06, 2008

SOURCE: tranny

try changing the transmission filter once they get clogged they will act like that.

Anonymous

  • 105 Answers
  • Posted on Mar 16, 2009

SOURCE: 97 Ford F250 no towing power

I would say to check the timing it may be retarded which would lessen the power. also you didnt say if it miss fires there could be a number of causes for the lack of power.

Anonymous

  • 1 Answer
  • Posted on Nov 16, 2009

SOURCE: 302 w/push button aod tranny to a ranger push button

will a 65 ford mustang rear end fit a 83 ford ranger

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Toyota celica 1992 2.2L won't accelerate

test one , all autotmatic trans is it?
1: RPM rises fast but MPH does not as normal.
2: RPM does not rise fast , bad engine.
#1 is called a slipping trans mission or will not upshift or first gear is dead.
gears mater, to go faster than 10 the tranny must upshift.
this test is simple engine weak or tranny bad.
easy as pie to detect, ask a gear head friend for advice even hands on.
what matter most is RPM it hit doing that. 2000 , 3000 ,4000/?
If RPM goes really wild over 10mph that is bad transmission
and more tests ask
0helpful
1answer

When i put car in reverse makes a winding noise and wont shift an any other gears

if engine rpm advances (fast to 3000), and the car dont move
the tranny is bad (what part , dont know)

so did you get to 3000 ENGINE rpm and car didnt move.?
that is bad trans. its slipping
1: check all fuses
2: check levels of ATF in tranny
3: do the 50,000 mile full flush and filter. change and pray?
4: do the FSM stall test, It fails, bad.
5: step 2 in FSM after above fails, measure (gage) the tranny pump pressure. if bad pressure (2 tests) tranny is bad.

all that is in FSM
or alldata.com login and read ON CAR tranny tests.
0helpful
2answers

My 1995 Nissan pickup xe truck when I put it in drive it will not shift out of first and once I get to the speed of 25 miles a hr. it shifts into neutral until it goes down to appx. 15 mph then it kicks...

V6 or I4 engine? xe = i4?
bad tranny.?
low or too high ATF levels.
clogged bottom filter before pump, (shifts hot?)
RE4 trans is 4speed electronic
RL4 xxx trans is manual only
this side of your tranny has a tag is it RL/RE4 or or 3speed.

3 speed or 4 speed the FSM show four A/T used then .
there are 5 tranny total then ,4 AT (1 m/t)
on car diagnosis varies greatly by type.
fluid checks (if electronic the Tcm blink codes (DTCS)
pressure checks. for weak pump.
that stall rpm tests.
here is one used on your car
http://www.bulkpart.com/Merchant2/graphics/Catalog-pdf/RE4R01A.pdf
0helpful
1answer

Jeep Squeals when 20 MPH until car at temp

Hi, check your pulley bearings, but if you have had the belts checked the mechanic should have picked up on that.
0helpful
1answer

I have a automatic transmission aod trans ad I've

Do you have a check vechile light or a check eng. light on? If so have the codes checked out. If not, did you try changing the fluid and filter?
The kit is usually pretty cheap, but if you do this remember to buy some transmission sealer/ lube. Add it to the transmission oil. I would add it about half way when filling the oil back up.
0helpful
2answers

Put truck in reverse bogs down and dies

is there any noise in the transmission or transfer case or the diff.Does it run ok in fwd. gears???possible sticking servos ,bad valve body,clutches bands in the trans
0helpful
2answers

302 w/push button aod tranny to a ranger push button

What year is the ranger and what year is the engine and trans?
0helpful
1answer

T84F150 Trans delays shift up to OD

aod tranny could be sticky clutches try changing fluid and filter if no change looking at rebuild
0helpful
1answer

99 f250 SD 7.3

Your speed sensor in your trans. needs to be checked out sounds like its not working or not getting a good signal until its generating enough power and speed to start until it reaches 30 MPH. Check that out sometimes it could just be some dirt on it. It all makes sense the ABS light is on because its not reading the speed of the tires, and the AOD light is on because It has no idea when to shift into overdrive without knowing how fast its going. I sure Hope that Helps You Out, And Thanks, Bear001
Not finding what you are looking for?

180 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...