At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
take a screw driver and gently pry up the power window and door lock stuff. Disconnect the wiring from them. Pop off the trim piece next to the mirror and remove the screw I dont remember any other screws but check. There might be 1 more. Then just lift the door panel up and its off. Ford made getting door panels off super easy.
Remove inner door panel...Push window up with hand until you can grasp the top edge...Bring to top and hold in place with packing tape...You will need to replace regulator/motor ...saailer
Not to sure this can be done. Maybe if you took off the door panel,you could wedge something to hold it up. Most likely you need a new window lift motor.Some come with the regulator attached.
The window regulator cable on a Ford Expedition is part of the regulator
assembly and is not serviceable separately. Therefore, if your
Expedition's window regulator cable incurs damage, you'll need to
replace the entire regulator. The cable moves the regulator up or down
in response to the window motor. If the cable malfunctions, you won't
have command of your Expedition's power
window until you replace the regulator. If you have basic auto-repair
skills and an hour of free time, you can replace your Expedition's
window regulator.
Pry the window switch bezel out
of the Expedition's door panel using your trim tool. Disconnect the
switch from the door harness by hand and set the switch/bezel assembly
aside.
2
Remove the hex head screws from
the door panel using the Phillips screwdriver. Depending on the year of
your Expedition, you may need to remove a trim cover from behind the
inner door handle with the trim tool to expose that screw.
3
Lift the door panel up and off the door by hand. If your Expedition has a courtesy light
in the lower-trailing edge of the panel, disconnect that light from the
door wiring harness before moving the panel away from the door.
4
Push the Expedition's window to
the top of the window frame by hand. Tape the glass to the top of the
door with packing tape to prevent it from dropping back down.
5
Remove the window regulator
mounting bolts with the socket set. Unbolt the regulator from the window
glass with the socket set. Pull the old regulator out of the
Expedition's door by hand.
6
Set the new window regulator into the Expedition's door by hand. Bolt it in place with the socket set.
7
Reinstall the Expedition's door panel in reverse of how you removed it.
Autozone sells the complete drivers side door window switch with all four switches and window lock switch for $111.00, Just put a flathead screw drivers under the switch panel and raise up and replace the whole switch, also on mine in the manual the #14 fuse is for power windows. Hope this helps
Remove sail panel cover for mirror, remove screw. Remove window switch cover and remove screw. Remove courtesy lamp lens on door and remove screw. Remove inside door handle trim cover and remove 8mm bolt and handle. Lift upwards and remove door panel.
Answer Here is the procedure, the "dimples" are on the metal surface of the inside of the door. With the waterscreen off you can locate the motor to help you tell where the dimples are. Drill holes then use a socket to remove window motor bolts.
Front Door Window Regulator Motor Removal and Installation
Raise the front door window glass to the full up position. Remove the front door trim panel. Remove the door speaker. Position the watershield aside. CAUTION: Make sure the electrical connector is positioned aside before drilling.
To access the power window motor bolts, use a 19 mm (3/4-in) hole saw with a 8 mm (1/4-in) pilot to drill three holes at the existing drill dimples on the door.
Disconnect the front door window regulator electrical connector.
Remove the bolts and the front door window regulator motor.
To install, reverse the removal procedure. Cycle the window glass to make sure the gears engage
please rate as solved if this is what you need. You will need to borrow a heavy duty riveter from autozone or wherever you buy the lock cylinder from.
Removal
NOTE: The rear door window glass must be completely raised. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
Remove the rear door trim panel. For additional information, refer to Section 501-05 .
Trim Panel —Rear Door, Expedition
Removal
Remove the power window switchplate (14524).
Disconnect the electrical connector.
Remove the rear door handle trim cover.
Remove the rear inside door handle.
Remove the door handle bolt.
Remove the rear door trim panel screws at bottom of panel.
CAUTION: To avoid damage to the rear door trim panel, do not pull directly outward. Lift upward and then outward to remove the rear door trim panel (27406).
Remove the rear door watershield.
Disconnect the power door lock actuator electrical connector.
Drill out the power door lock actuator rivet.
Remove and discard the screws.
Remove the power door lock actuator.
Disconnect the power door lock actuator rod.
Installation
NOTE: Use new screws when installing the rear door latch. To install, reverse the removal procedure.
There is a double ground wire inside the drivers sided kick panel and the bolt is either loose or missing.
2007ford expedition
windows lowers fine, needs assistance to raise
I need to disconnect the window from the metal inner panel
loose
Drivers side window raises bur jams before fully lowered
×