-
Dodge Master
6,826 Answers
- Posted on Aug 27, 2010
Re: How do I fix my window washer pump on my 2000 dodge...
One can get a repair kit that includes a new motor pump and wiring clips, or
one can get the original motor that plugs into the windshield wiper fluid reservoir.
---
Windshield wiper reservoir (gives idea of how to change the windshield wiper fluid pump motor)
Removal & Installation
To Remove:
- Disconnect and isolate the negative battery cable.
- Raise and safely support the vehicle.
- Remove the right front wheel and splash shield.
- Disconnect the electrical connectors from the pumps and detach the rear washer hose.
- Place a drain pan under the reservoir if it contains fluid.
- Disconnect the front washer hose at the wiper unit in the engine compartment.
NOTE: The front hose will be removed with the reservoir.
- Let the fluid drain from the reservoir.
- Remove the mounting screws and the reservoir.
To Install:
- Install the fluid reservoir with the mounting screws.
- Connect the front washer hose in the engine compartment.
- Connect the electrical connectors and rear washer hose.
- Install the splash shield.
- Install the right front wheel.
- Lower the vehicle.
×