At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The service air bag light is on the dash and the red airbag light is on. IT WAS COMING ON AND THEN GO OFF, BUT NOW IT STAYS ON. IT IS A 2003 CHEVY TAHOE WITH 70K MILAGE ON IT. Thanks for any help you ccan give me.
Michael
Re: The service air bag light is on the dash and the red...
You need to pull the codes from the computer, to know where to go next. Typically, there is a sensor that gets contaminated from road water...but pull the codes...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 3:49
https://www.youtube.com/watch?v=au-3OSjDXfM
Oct 1, 2013 - Uploaded by OBD Diagnostics
SRS Airbag Fixing - very easy to do the tool is here ... 2004Chevy Silverado service air bag message troubleshoot PART 1 - Duration: 4:09. by ...
ASA 06/2010 ... The airbag light is an indicator lamp on the dashboard to alert the driver (or passengers) to any ... Some vehicles require a special "scanner" or airbagscan tool to reset the light. ... My car was in an accident, the airbag did NOT deploy, but my airbag light is on. What does that mean and how can I fix it?
Sep 15, 2012 - 10 posts - 6 authors
2010 Malibu ltz ... 3 days ago car would not start- dead battery- son jump started it and got it going- now the SERVICE AIR BAG lite is on. ... The dealer with his scan toolholds all the cards when it comes to the air bag system. ... so as soon as I fix the tension sensor, the PPS code will clear and then so will ...
That means there is a fault in the airbag system. Every time you start the vehicle it will do a self check. If the self check fails the light will stay on.
You will need a higher end scan tool to pull codes from the airbag module. Once you know what codes are present you will have a better idea of what direction to head into.
Post the codes in the comments below and I'll do my best to help you figure it out.
Not normal at all. Could be a connection problem at the air bag pre tensioners, the part where your seat belt clips in to when you wearing the seat belt, or could be the hooter ring contact that is not good or the airbag/s has been activated then airbag computer and seatbelt stalks that activated has to be replaced.
Without a scanner u can disconnect the batt for 15 minutes but sounds like you forgot to hook up a plug. Some vehicles have an airbag plug under the seat and are usually yellow. Make sure all plugs are right or pins didn't bend or push out of the back of the plug
In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to disarm the airbag system can result in an unexpected Airbag deployment and possible serious personnel injury disconnect the battery 30 minutes prior to start of work.
The air bag light will remain illuminated if a fault has been detected in the air bag system.
The onboard computer will need to be interfaced with diagnostic equipment to read the fault.
This is also the only way to reset the light.
Good luck, I hope this helped.
×