2003 Ford Focus Logo
Anonymous Posted on Aug 09, 2010

Stalls when I slow down. stalls when I start it after the engine is warm. replaced throttle position sensor. no luck. wtf?

  • darrel Aug 09, 2010

    please state what make and model?

  • Anonymous Aug 09, 2010

    2003 Ford Focus zx3 2.0 DOHC

×

1 Answer

darrel

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 16 Answers
  • Posted on Aug 09, 2010
darrel
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Aug 09, 2010
Answers
16
Questions
0
Helped
2601
Points
39

First make sure all the engine breather hoses are clear and does your brake servo hold vacuum after the car has been parked for a few hours (pump thhe pedal and you should feel it begin to go more solid each time it is depressed

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

84 Corvette crossfire engine stalls out when running and trouble restating after stalling out...fuel pump replaced five times along with fuel filter and fuel pump filter...car sitting since 2008 and...

Yea , those crossfire injection vettes can be a bear sometimes . I had dealings with them 84-85 - 86 working as a tech at a chevy dealer . Don't remember much about them , haven't heard anything about them for long time .

How's the fuel pressure ? Have you put a fuel gauge on it ? I would imagine you don't have a Tech 1 scan tool ? What's the map sensor voltage at idle ?

1984 Corvette hesitation stalling stumbling During Warm Up Only

1984 Corvette cleaning checking the check valves

0helpful
1answer

Buick 2002 lesabre- stalls 1 or 2 a week and starts up.nothing shows in diagnostic code. stalls when slowed or stopped

Have you had it to a shop that has a professional type scan tool that can view engine sensor data parameters ? Do you know what those are ? Idle air control counts , mass air flow sensor data , MAP sensor , TPS - throttle position sensor , crankshaft position sensors , Cam sensors , engine coolant temp , intake air temp etc......
0helpful
1answer

When my 1999 Chevy Suburban is cold, I start it up and when the accelerator is depressed, the engine bogs down, and it back fires and stalls. When driving, I have to let off the accelerator and depress it...

Possibly the throttle position sensor. Easiest way to test is connect a scanner and go to real time data mode. With the key on,press the accelerator slowly and watch the throttle position change on the scanner. If it doesn't register a change when you start opening the throttle, replace the sensor.

b96a8900-5c77-4a25-aef0-35524c25596d.jpg
0helpful
2answers

Stalling after vehicle is warmed up

throttle position sensor , or mass air flow sensor.
0helpful
1answer

My 2000 cavalier was at the stop sign and the engine for no reason started racing to 3000 rpms nearly throwing me into traffic! WTF?!!! the wrench service light just came on yesterday and stalled out once

Sounds like a throttle position sensor sticking in a very dangerous position. The throttle position sensor does exactly what it sounds like. Senses the throttle position and sends it to the injectors, if the position sensor is sticking open it is a very dangerous situation. Get your vehicle to a mechanic and have them scan the check engine light and besure that is the issue before going any further, but that is your most likely answer, Good Luck!
2helpful
1answer

94 Lincoln TC engine stalls when slowing/stopping

Most common cause of stalling for Lincolns in that era is the TPS (Throttle Position Sensor). It regulates fuel mixture, idle speed etc. A bad TPS will usually act up in one of two ways:
  1. When cold, car continually stalls
  2. When warm, car stalls when slowing down (especially if AC is on)
As far as valve cover oil leak, it's a problem that should be addressed to keep oil from fouling your spark plugs but highly unlikely to be the cause of your stalling problem. Hope this answers your question. All the best.
Greg
0helpful
1answer

96 daihatsu charade idling problem

You may find the throttle position sensor (TPS) needs adjusting or the throttle plate is gummed up and not closing completely. The other two possibilities are the coolant temp sensor and air temperature sensor.

Run a diagnostic per the following:

here
Not finding what you are looking for?

209 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...