Need to install a timing belt on a 2002 ford focus with a 2 liter zetec engine cant find the timing marks

The 1.6 and the 2.0 have the same belt setup, so watch the 2 part video of the entire job, don't mess this uo ior you might bend the valves. Ford Zetec 2 0 liter timing belt replacement Part HD

Ford Zetec 2 0 liter timing belt replacement Part HD

Harold, According to the 2002 Ford Focus Owner manual,
With engine oil filter change : 2.0 liter SPI engine takes ( 3.78 liters / 4.0 U.S. quarts of 5W-20 )
2.0 liter Zetec engine takes ( 4.25 liters / 4.5 U.S. quarts of 5W-20 )
links below talk more about what they think oil should be used.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Oil recommendation for 2002 Ford Focus Passenger Car Motor Oil PCMO...

Ford Focus 1998 2004 99 1 8 Confusion over acceptable oil grade to use...

What kind of oil do you use in your Focus

2002 Ford Focus Specs

What engine does yours have ? 2.0l Zetec ? You need special tools !

2003 FORD FOCUS 2.0L 4-cyl Engine Code [3]
Engine Oil Grade 1......API* All TEMPS......SAE 5W-20, Engine, with new oil filter 4.3 liters.
Thank you for using fixya and good luck Oil Drain Plug.....17ft/lbs Torque

there are no marks, special tools are needed when replacing the timing belt.

This is a very very easy timing belt setup. first off you have to remove the valve cover. Then you have to remove the serp belt. Then remove anything thats in your way of the front cover. after you remove the crank pulley re-install the crank bolt. DO NOT LOSEN THE BOLT FOR THE TENSIONER!!!! now spin the crankshaft until the sproket aligns with the timing mark. now at this point the two camshafts should be aligned. now there is a special tool from ford that holds the cam shafts in place. all it is is a 1/4" peice of metal that goes on the left side of the cam shafts to hold them into place. if you mark the cams you wont need the tool. or if you can find something to fit in the left side of the cams that will work too. anyways after that its just the same steps in reverse. very easy to do.

ADVISE YOU NOT TO TOUCH THIS UNLESS UR MECHANILLY COMPENENT YOU NEED SPECIAL TIMING PINS & BAR FOR THIS & ARE NOT THE EASIEST TO TIME UP.

please helpme i need timing marks for ford focus 2000 16 valvs

Hi,

To my knowledge, a 2003 Ford Focus 2.0 SPi engine would need 4 quarts of engine oil (roughly 3.78 liters). Incidentally, the Ford/Cosworth Zeta/Zetec engine would be needing 4.25 quarts (~4 liters).

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.