I had my tires rotated on my 2007 Dodge Caliber. The tire pressure sensor is not registering that the tires are in a new place. I've driven over a month like this - how do I get the system to reset? I've tested the tire pressure manually on each tire and can verify that the low pressure tire is not in the position that the sensor says its in.
Tire pressure sensor
Hello
Welcome, If you have driven over a month and it has not reset there is a problom with one of the 4 sensors, You will need to have the TPMS scaned to see witch sensor is not working,, Here is a link explainin this in detail
http://www.chryslertpms.com/
In installing the tyre pressure sensor there is a specific torque to tighten the valve sensor, be sure that this instruction must be followed, and also check if the replacement parts is correct, and in my experience i traveled to 280 miles before the warning light turn off, and according to dodge dealer is,, the car computer will learned itself to sense the frequency of the sensor
8,261 views
Usually answered in minutes!
Also, after I picked the car up from having hte summer tires put on, the light stayed on about a day or two, then it went out for a week and came back on again, flashing for about a minute when I first start the car and then stays on solid until I shut the car off again. Very frustrating to look down and see a light on the dash all the time.
×