SOURCE: Power Door Lock Problem
I have has my door panel off and realized that if the window switch becomes loose or falls off this will prevent the door switches from working. As far as the back window and lock. Same problem same problem on mine. The rivet that holds the actuator for the lock corrodes and the actuator binds in the window mechanism. Not easy to fix but fixable.
SOURCE: remote lock for back doors and rear tail gate door
Actually I found a solution. I remove the lock relay form the fuse panel and placed it back in place. I did not replace it. After doing this they worked. I probably need to replace the relay at some point, but for now that solved the problem. It was hard for me to believe that there is a separate relay for the lock and unlock circuit.
SOURCE: drivers door controls quit working
wires or plug where they pass from body to door in a big rubber sheaf
SOURCE: 2002 Jeep Grand Cherokee electric door locks not operatin
the passenger door switch pack controls all door locks as this is the receiver from the remote you might want to try this and also check connections
SOURCE: Driver and Passenger auto door locks are inop.
Sounds like bad wiring, or bad door lock actuators. Check for power while locking/unlocking the doors.
182 views
Usually answered in minutes!
×