Hello a few days ago I cganed the cooling liquid to my Jeep.
but I dont know how to get out air form the cooling system.
Engine is a 3.1 for european market.
Try removing the radiator cap when the engine is cool and top off the coolant level. Start the engine with the cap of and let it run to operating temperature which is when the thermostat opens. If you lightly grab the upper radiator hose. If it is cool or warm, the thermostat has not opened. If it is hot, the thermostat has opened. At that time have someone assist you by sitting in the car to rev the engine up (1800 to 2000rpm) and hold it there while you once again top off the radiator and tighten the cap. DO NOT BRING THE RPM DOWN TO IDLE WITHOUT HAVING THE CAP ON TIGHT! THE HOT COOLANT WILL OVERFLOW FROM THE RADIATOR! Then let the engine run to see if the air has escaped. You may have to do this procedure more than once. If at any time you feel that the engine is getting too hot, tighten the radiator cap and then shut the engine off. Then let it sit and repeat the steps above. Constantly monitor your temperature gauge at all times.
184 views
Usually answered in minutes!
×