How do i fill manual trasmossion fluid? - 2007 Suzuki Forenza Sedan

Text based help and videos. The best way is to measure what comes out and replace the same quantity. If it has a manual dipstick, you can fill by level once it has warmed up, then turned off and settled.

https://www.google.com/search?q=2003+mercury+mountaineer+AWD+V8+transmission+fill+capacity%2Frequirements+after+a+fluid+change+and+filter+change

AUTOMATIC TRANSMISSION FLUID

For Automatic Transmission: 5R55E....MA5
SPECS INFO Capacity: 5 speed 5R55E Total Fill 13.4 quarts. ..

Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES
Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

never change filter as i dont think it exsists. The fill should be located on the transmission up from the drain. You fill untill fluid pours out and stops then replace plug. Car must be level.

On the passenger side of the transmission, there is a fill plug and a drain plug. The fill will be the upper plug and it's the one you use to check to make sure you have the right amount of transmission fluid in your transmission. Manual Transmission, NV3500..........2 liters Manual Transmission, NV1500..........2.7 liters

Undo the plug with a wrench and if the transmission trickles out, your good to go. If there is no fluid trickling out, top it off and place the plug back in and tighten to (Manual Transmission NV1500 Fill Plug 17 ft/lbs) or (Manual Transmission NV3500 Fill Plug 44 ft/lbs)
Thank you for using fixya and be safe. Drain Plug 44 ft/lbs Drain Plug 27 ft/lbs

manual trannis don't have a dipstick. they got an fill and drain plug. if you locate the fill plug fluid should be able to put your finger in there and feel fluid.

2006 CHEVROLET TRUCKS SILVERADO 1500 PICKUP 4.3L 6-cyl Engine Code [X]
Manual Transmission,NV3500......GLS

GM part no. 12345349 or equivalent. Manual Synchromesh Transmission Fluid 5W-30
Manual Transmission, NV3500 (SEC)..........2.3 liters Approximate, fill to level of fill plug.

TORQUES:
Manual Transmission NV3500
Fill Plug 22 ft/lbs
Drain Plug 22 ft/lbs

Good luck and this should help.

If automatic transmission use the dip stick tube to fill, but watch that you don't over fill.

It depends on if have you have a 3 speed automatic, 4 speed automatic, or a manual transmission.

The 4 speed and manual tranny share their fluid with the differential so if you fill the tranny you fill the differential at the same time.

The 3 speed differential does not share its fluid with the tranny. To fill or check the fluid on the 3 speed automatic you will need to get underneath the car. The fill bolt faces the firewall side of the transmission. It is about 4 inches above the differential drain plug. You will need a fluid pump and hose to get the fluid into the fill hole. The fluid you will need is Dexron tranny fluid.

Yes there should be 2 plugs on the side of the tranmission for this. one at the bottom is for draining and one about 1/2 to 3/4 up the side of the trans is for filling.

See if you can find the leak and fix that first. After its fixed then get the right fluid for your truck, check owners manual, and fill it to the top of that fill plug.

Manual trans fluid is good for 100k or more.

The 'fill' plug should be on the transaxle housing behind the front passenger-side wheel and requires a 17mm socket. the 'drain' plug should be on or near the bottom in about the same area and requires a 24mm socket. To check the fluid remove the 'fill' plug (some fluid may spill out so be prepared) and ensure that the fluid level is up to the bottom of the 'fill' plug hole. (easiest way is with your finger, if it gets fluid on it when inserted, you're OK). Your service manual recommends changing this fluid every 15,000 miles according to my sources. Make sure you don't lose any washers and that the plugs are clean when put back. Your transaxle takes 4.6 pints of GL-4 (75w85 or 75w90) - don't use GL-5 as it can contain additives which can corrode your bearings, and tighten both fill & drain plugs to 22-25 lb.ft. (roughly snug then 1/8 turn) being careful not to over tighten which can damage the threads easily.
Also, 'all-wheel-drives' have a transfer case which requires the same service. The fill & drain plugs are roughly near the center, behind the exhaust manifold. Follow the same procedures and use the same fluid.