I have a 2002 chevy avalanche, theirs a black box under my driver side seat and it has been exposed, the top of the cover broke, so i had to move the circut board, like jiggle it to get the seat to move back and forth, well the it broke and now it wont work at all. theres a female end and a male end, the male end is connected to the circut board and the female end is connected to the seat harness, well one of the male prongs broke off the circut board, so i need to know how to fix this problem. i need help bad, cuz seat is stuck to close to steering wheel and its hard to drive like that so can i get some feed back on what to do
check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.
178 views
Usually answered in minutes!
×