-
Chevrolet Master
2,993 Answers
- Posted on Apr 27, 2010
Re: headlight swicht broke
Removal & Installation
-
Disconnect the negative battery cable from the battery.
-
Remove the lower steering column cover-to-instrument panel screws and the cover.
-
Remove the instrument cluster trim plate-to-instrument cluster screws and the panel, then allow the panel to hang to the left side by the wiring.
-
Disconnect the electrical connector from the rear of the headlight switch.
-
Disengage and remove the headlight switch from the instrument cluster trim plate.
To install:
-
Connect the electrical connector to the rear of the headlight switch.
-
Engage and install the headlight switch in the instrument cluster trim plate.
-
Install the instrument cluster trim plate-to-instrument cluster screws and the panel.
-
Install the lower steering column cover-to-instrument panel screws and the cover.
-
Connect the negative battery cable to the battery and check operation.
×