Where is the alarm siren located under the hood of a 2003 Hyundai Sonata 2.7 V6? I know the siren is under the hood, I need to know where. I believe the siren was removed during a body repair and not replaced, but I don't know where it should be and the first response was useless. Thanks all!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Per my local dealership this problem has been identified by Hyundai and a service bulletin released. There is a plunger-type limit switch under the hood (passenger side front corner - easy to see) that isn't being depressed enough by a small rubber bumper attached to the underside of the hood. The fix is to replace the existing bumper with one that is slightly longer. The replacement part number is 92736-3M000 "Pad-Lid Switch". It cost me 80 cents with tax. Just pull the old one out and push the new one in.
There is a Technical Service Bulletin (TSB) that addresses intermittent alarm self-activation. It involves replacing a small rubber bumper under the hood.
See your local Hyundai dealer and ask them about Bulletin Number 09-BE-026.
Hello police32127. My name is Roger and i will answer your question. To locate the camshaft sensor. Raise he hood stand at the drivers side tire. Look at the cylinder head on your left. You will see it mounted on the head. Sets between the head and the upper radiator hose.
Please rate the answer you received. This way w know your answer helped. Should you need further help please just ask. Thank You for using Fix Ya. Roger
there is a hood switch located at front passenger side under hood. check to make sure the plunger at hood is pushing the switch completely down. sometimes there may be just enough clearance that a strong wind will set the alarm off.
×