Shift suddenly become very hard. When going from park to either
reverse or drive it slams into gear. 1-2 and 2-3 shifts are also harsh.
All gears seems to work. Problem may be intermittent: Check TPS for smooth and linear electrical response over the entire range of motion. If not, replace.
Extremely harsh shifts from P or N, normal shifts at WOT: EPC
(Electronic Pressure Control) solenoid failed. Easy fix in pan. Fix as
soon as possible or hard parts will eventually break.
No 1st or 4th available; trans shifts 2nd to 3rd by itself in D or OD and locks the converter : ShiftA solenoid failed. Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.
Car goes into gear but feels very sluggish like the brakes are dragging,
but it will roll easily (starts out in 4th gear), you manually shift to
2 to get it moving, once it's moving you put it back in OD and the car
shifts 3rd to 4th on its own and locks the converter at the appropriate
time: ShiftB solenoid failed: Easy fix in the pan. Or a wiring problem
from PCM to trans.. or PCM.
784 views
Usually answered in minutes!
×