sounds like you are working on a car FSM free?
why do that?
95 YJ
early wrangler
i have 95 yj fsm and 93, the 93-95 are a year class range.
very simular.
here is a free 93 fsm with full schematics in chapter 8w
wiring chapter, clik
pdf 76 is page YJ 19 actual
and as you can see its cave man simple 2 wires.
minus to ECU ignitor driver. transistor (inside ecu)
and
+ goes to
a142 sheet 5 (pdf 62)
im not sure what part A<B<C is, a fuseable link, is my guess
and is blown. but that be a bingo spot for sure.
the full manual is there.
see spark chapter.
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service
posted over 100 times, this link, its not new.
This is what we have done to the Jeep and we still have the problem. Put on New crand sensor, changed plugs and wires, rotary cap, distributor cap, coil, new electrical switch, new ground cable and cleaned all grounds and checked to make sure they were ground good. Please....any other suggestions?
sorry new crank sensor
×