Re: My heat won't get hot on my acura cl 3.2 2003. It...
Turn the heat knob all the way to hot (highest) setting and when it starts blowing heat you can turn it down to a comfortable temperature
At least that's how mine works
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You said that you replaced the battery so in either case of new or another battery have a load test done as what you describe indicates a failing cell in the battery or loose t/dirty terminals.
I would check the main fuse relay aka fuel relay... Located under the dash, on the steering colum... They go bad with the heat.. I have an 01 cl and would act stupid on hot days and that relay fixed my issue...
your heater core is bad, or the little temp control.door is hung open. i would take it to someone familiar with removing dash panels like a radiator shop or a dealer.
Let me see if I got this straight. The blower motor is blowing but when selector switch is on heat no hot air comes in from blower correct?
Were you getting hot air before you changed the thermostat?
If you answered yes to both questions then here are your options:
a )incorrect water coolant mixture ( can't use straight antifreeze)
b)incorrect thermostat or incorrectly installed
c) air in the coolant system (must be bleed according to specs.
Now if blower is not blowing at all thats a different situation. Let me know what happens.
×